4 Inch 5-Step Dry Diamond Polishing Pad Set
Ready to ship from our EU warehouse in Poland. Delivery options and charges are shown at checkout.
Technical highlights
- Machine compatibility
- Angle Grinder and Handheld Polisher
- Wet / dry use
- Dry
4 Inch 5-Step Dry Diamond Polishing Pad Set
5-Step Dry Diamond Polishing Pads for Professional Stone Finishing
A complete five-pad dry polishing system for progressive surface finishing—from Step 1 at 50# to Step 5 at 3000#. Designed for suitable angle grinder setups where a clean, water-free workflow is preferred.
Dry Polishing With an Angle Grinder—No Water Line Required
The yellow diamond-patterned working face contacts the stone surface, while the colored numbered side identifies the polishing step and remains on the machine side during operation.
- For suitable 4 inch / 100 mm angle grinder setups
- Suitable for workshop, countertop and on-site finishing work
- Use appropriate dust extraction, PPE and the machine manufacturer's speed guidance
One Set Covers the Full Progressive Polishing Sequence
Work through the pads in numerical order. Step 1 starts the sequence at 50#, while Step 5 completes it at 3000#. The intermediate steps progressively refine the marks left by the previous pad.
- Use Steps 1 → 2 → 3 → 4 → 5 in order
- Avoid skipping steps when a consistent finish is required
- Clean the surface between steps to reduce cross-contamination
Flexible Diamond Surface With a Raised Triangular Pattern
The flexible working face helps the pad follow flat surfaces and gentle edges. The raised triangular pattern provides multiple polishing contact points with open channels between them.
- Diamond abrasive working surface for progressive stone finishing
- Raised pattern supports debris clearance and heat dispersion
- Flexible construction helps maintain controlled surface contact
For Natural Stone, Engineered Surfaces and Compatible Tile Applications
Common applications include granite, marble, quartz, engineered stone, concrete, terrazzo and compatible ceramic tile surfaces. Final performance varies with material hardness, surface condition, pressure and machine speed.
- Granite, marble and quartz surfaces
- Engineered stone, concrete and terrazzo
- Compatible ceramic tile applications after testing
Check the Set Before Ordering
| Product type | 5-step dry diamond polishing pad set |
|---|---|
| Diameter | 4 Inch / 100 mm |
| Set contents | 5 pads: Steps 1, 2, 3, 4 and 5 |
| Sequence range | Step 1: 50# · Step 5: 3000# |
| Primary machine | Angle grinder with a compatible mounting setup |
| Use type | Dry polishing |
| Backing | No Hook & Loop backing |
| Warehouse | EU warehouse in Poland |
Before You Start
Do these pads require water?
No. This is a dry polishing system. Use suitable dust control and personal protective equipment during operation.
Should I use all five steps?
For a complete progressive finish, use the pads in order from Step 1 through Step 5. The exact starting step may depend on the existing surface condition.
Do the pads use Hook & Loop backing?
No. Confirm the compatible mounting arrangement for your angle grinder before ordering.
Can I order more than one set?
Yes. Select the quantity you need and place the order directly through the store.
