125mm Vacuum Brazed Diamond Cutting Disc for Dekton, Porcelain Tile, Marble & Granite
Recogida disponible en EU Warehouse (Poland)
Normalmente está listo en 2 a 4 días
Technical highlights
- Best for
- Clean, controlled cuts on tile, ceramic, marble and stone.
- Materials
- Tile, ceramic, porcelain, marble, stone
- Machine compatibility
- Standard angle grinder y Handheld grinder with 22.23mm / 7/8 inch bore compatibility
- Wet / dry use
- Dry cutting on hard building materials
- Max RPM
- Confirm grinder RPM matches the 115mm disc rating before use.
- Thread / arbor
- 7/8 inch / 22.23mm bore; 4.5 inch / 115mm disc
- Technical note
- Use appropriate eye and dust protection. Confirm bore fit, material suitability and grinder speed before cutting.
125mm Vacuum Brazed Diamond Cutting Disc for Dekton, Porcelain Tile...
125mm Vacuum Brazed Diamond Disc
Fast, Controlled Cutting for Hard Surface Materials
A 125mm vacuum brazed diamond cutting disc for Dekton, sintered stone, porcelain tile, marble, granite and similar hard surfaces. Designed for compatible 125mm angle grinders with a 22.23mm mounting bore.
Vacuum Brazed Surface
Exposed Diamond Grit for Efficient Cutting
The exposed diamond abrasive surface provides direct contact with the material, supporting efficient cutting and consistent performance on dense hard surfaces.
- Dense diamond abrasive working surface
- Strong vacuum-brazed bonding
- Reinforced metal centre bore
- Stable performance during high-speed cutting
- Suitable for compatible 125mm angle grinders
Material Applications
Made for Hard Surface Cutting
Select the cutting disc according to the material, machine and required finish. Test on a small or concealed area before completing the full cut.
Check Before Ordering
125mm Disc with 22.23mm Centre Bore
Confirm the machine guard capacity, spindle system and flange compatibility before ordering.
| Product Type | Vacuum brazed diamond cutting disc |
|---|---|
| Diameter | 125mm / 5 Inch |
| Centre Bore | 22.23mm |
| Compatible Tool | Compatible 125mm angle grinder |
| Use Method | Wet or dry, depending on the material and conditions |
| Materials | Dekton, porcelain, marble, granite and similar surfaces |
| Package | 1 × diamond cutting disc |
Safe Use Guidance
Inspect the disc before use, install it with the correct flange and keep the machine guard fitted. Wear suitable eye, hearing, respiratory and hand protection. Never exceed the permitted operating speed.
Compatibility Reminder
Confirm that your machine supports a 125mm disc and a 22.23mm centre bore before checkout.
Ordering & Delivery
Poland warehouse support, DHL tracked delivery and 7-day return service are available according to destination and store policy.
